Halloween Costume Update: Round Eared Cap

I've finally completed  my daughter's Colonial American girl costume.  Here is the completed outfit.  One piece was particularly difficult to make; the round eared cap.  It's not that the actual project was difficult, just figuring out how to make it.  Overall, I'm happy with the end result.  Although, there were some hiccups along the way.  It's not quite as historically accurate as I'd like it to be, but this was a faster, more cost effective version.

Historically, women and girls wore these caps from the 1740's through the 1820's.  They were made of white linen, and obviously hand sewn.  There are historical patterns available, but I didn't want to spend the money on a pattern.  I looked at some pictures of finished caps, and a wonderfully helpful website with general instructions for making historical caps.

Mine, on the other hand, is made from an old white cotton pillow case.  It is mostly hand sewn.  I did use the machine to sew the draw strings.  I also machine sewed the casing for the draw strings, however my stitches were too close to the raw edge and it pulled out.  So, I ended up hand sewing that part, too.

I didn't follow any particular pattern.  I just took a few measurements of my daughter's head and cut pieces out of paper to try on her.  If I make another one in the future, I will definitely make it bigger.  What I thought would be the right size, ended up a little too small for her.  It would probably fit a 4-5 year old much better (she's 9).  

Here is my paper pattern with a 12 inch ruler for scale.  From top to bottom the pieces are the crown, ruffle, then band.  I cut two pieces of the ruffle.  If your fabric has a finished edge (selvedge), use that edge for the front edge of your ruffle. That eliminates the need to hem it.  I did not make a pattern for my drawstrings.  I simply cut two strips of fabric about 1/2 inch wide and 8-10 inches long.

Fold your drawstring pieces in half, lengthwise.  Stitch them shut.  Because they are so narrow, it is very difficult to turn them inside out.  My quick fix solution was to trim the raw edges, and seal them with clear nail polish.  I'm not sure how effective a solution this is for the long term, but it will at least get us through Halloween.

On to the crown...Because I didn't allow for extra room for a hem, I machine sewed my hem much too close to the raw edge and ended up having to hand sew it after it unraveled on me.  You can choose to either add an extra 1/4 inch or so to the bottom of your crown and machine sew the hem (or casing), or leave it as is and hand stitch it.  

Next, cut a small slit at the center of the casing.  Use needle & thread to wrap the hole like a button hole.  Use a safety pin to feed the drawstrings through the casing, letting the extra length hang out of the center hole.  

For the top of the crown, hand sew a running stitch for your gather.  I cut a piece of thread the same length as the length of the band.  That made it easy to fit the two pieces together.  Evenly distribute the gather and pin the two pieces together.  Be sure to include the drawstrings.  Whipstitch the crown and the band together using very small, close stitches.  After you have attached the two pieces, remove your gather thread.

Now for the ruffle...As I stated before, if you have a nice finished edge that you can use for the front of your ruffle, do it!  Since I made my cap out of a pillowcase, I had no nice edge.  I did not want to hem the front of the ruffle, so I again used clear nail polish to seal my freshly cut edge.  Attach the two ruffle pieces, end to end, with a couple of small stitches.  Next, cut another length of thread the same length as your band and gather the back edge of your ruffle.  Again, pin the two pieces together and use a small, close whipstitch to attach the ruffle to the band, removing the gather thread when you are done.

 

There you have it, a genuine fake Colonial America era historical-ish round eared cap!  I hope your hands and eyes don't hurt from all those whipstitches as much as mine do.  More importantly, I hope this tutorial helps make your project a little easier.

Karissa

Shopping Bag DIY

Earth Day is Monday.  It is one of my daughter's favorite holidays.  Her birthday is near Earth Day, and so she feels very in tune with it.  She is my little Earth Girl.  She loves projects that give her the opportunity to recycle, reuse, or reduce.  This year for our Earth Day project we re-purposed two of her favorite shirts into re-usable shopping bags.  She outgrew the shirts a couple of sizes ago, but couldn't bear to let them go, so with a few cuts and about 5 minutes worth of sewing we converted them to shopping bags she can use for years to come.  (Stains and all!)  The whole project only took about half an hour, and is simple enough for an 8-10 year old to do independently. Here is what we did...

Start with any t-shirt.  (Non-fitted shirts will give you more square bags.)
Choose old shirts from your closet or hit up your local thrift store.

Cut off the sleeves as close to the seam as you can without cutting the serged edge.
Not cutting the finished edge of the fabric will help prevent fraying.

Turn the shirt inside out and fold it in half.  Use chalk or pencil to mark where you
want to cut around the neck.  Use straight pins to hold the layers of fabric in place.

Cut along the line you drew.
Here is what it will look like at that point.

Flip the shirt inside out again, and sew a straight stitch across the bottom hem.
Here is the finished product.

What ideas do you have for recycling, reusing, and reducing?

Karissa